Industrial heaters

ANB model for mobile or wall use

The airfoil ANB3'6 is a device for mobile use or fixed installation at high level (minimum height from the ground 1'8 m).
The rest of the range of ANB air conditioners are devices for mobile use or fixed installation at any height of the wall.
If the air heater ANB is used as a wall, it will be fixed with the corresponding accessory.
The wall mounting accessories allow a horizontal turning angle of 180 °.

RMO and RMOB models for wall use, fixed installation
Installation at high level: It is an installation at a height not less than 1.8 meters above ground level,
According to UNE EN 60335-2-30

Wall device for fixed installation at high level.
• Enclosure of advanced design, with paint finish dried at 150 ° C.
• By means of a simple maneuver on the side knob we can orient the air heater vertically with four fixed positions.
• Front protective grille.
• Silent fan.
• Cold or hot air signaling.
• Manual reset safety thermostat

RIM Model
IP55 aluminum terminal box.
Charged heating element 4W / cm².
External protector of perforated metal plate
Options: Thermostat 0-40 ºC with external control.
RIT Model
Indicated for the heating of public premises
IP55 painted plate terminal box.
Flanged heater element charged 2.5 W / cm².
Perforated Sheet Metal Protector
Options: Thermostat 0-40 ºC with external control
RE Model 
IP55 painted plate terminal box.
Heating element in U loaded 2.5 W / cm².
Perforated sheet metal protector.
RIC Model
ORGM terminal box
Flanged heater element charged 4 W / cm².
Equipped with a thermostat 0-40 ºC with external control
Perforated Sheet Metal Protector

Model RAE T3. Explosion proof
LCIE Certificate No. 94 C 6 I 48X Flange Resistors Classification Group II T3
Maximum heating element temperature 200 °C Options: ketal
Thermostat 0 40 ºC Wall bracket Other powers on request
Model RAE T4. Explosion proof
LCIE Certificate No. 94 C 6 I 48X Flange Resistors Classification Group II T4
Maximum heating element temperature 135 °C Options:
Thermostat 0 40 ºC Wall bracket Other powers on request
Model RBAE T3. Explosion proof
LCIE certificate No. 00 E 6003X Steel tubes and fins Classification Group II T3 Maximum temperature of the heating element 200 °C
Other powers on request